Mike's Brake & Alignment Shop

Honest & Quality Service

Tag: auto care (page 1 of 3)

Coolant Leaks: Why Do They Happen and What Should I Do?

May 2, 2024 / / 0 Comments

Coolant leaks might not seem like a big deal, but they could create a hazardous situation for your car’s engine. The coolant keeps your engine running smoothly by regulating its temperature, and without the proper amount of it, your engine could overheat. Think of it as your car’s lifeline to staying cool under pressure. Coolant leaks, however, can throw a wrench into that smooth operation. Let’s dive into why coolant leaks happen and what you should do about them.

Why Do Coolant Leaks Happen?

1. There’s a Hole in the Radiator: One of the most straightforward reasons for a coolant leak is a hole in the radiator. All your car engine parts including the radiator must endure extreme temperatures and it takes a toll in different ways. The sealing gasket connecting the tank to the radiator is also susceptible to wearing out, potentially resulting in a leakage issue.

Related: Learn more about the reasons behind car engine failure here.

2. High Pressure: The cooling system in your car operates under high pressure to ensure efficient heat transfer. However, this high pressure can sometimes lead to leaks if there’s a weak spot in the system, such as a worn-out hose or a cracked component.

3. Your Water Pump Has Failed: The water pump plays a crucial role in circulating coolant through the engine. It is usually driven by a belt and is located on the lower part of the engine, near the drive belts. If the water pump fails, the coolant won’t flow properly, leading to overheating and potential leaks.

What Should You Do if You Suspect a Coolant Leak?

1. Check the Puddle: The color of the puddle can give you clues. Coolant is typically green, orange, pink, or blue. If you see a puddle of one of these colors, it’s likely the coolant.

2. Inspect Under the Hood: Look for wet spots or stains around the hoses, the radiator, and the water pump. These are common areas for coolant leaks.

3. Monitor Your Temperature Gauge: If your engine starts running hotter than usual, it could be a sign of low coolant due to a leak.

4. Top Up If Needed: If you confirm a coolant leak and it’s safe to do so, top up your coolant reservoir with the recommended type of coolant for your vehicle.

5. Get Professional Help: While DIY fixes like adding stop-leak products exist, they’re often temporary solutions. It’s best to have a professional mechanic inspect and repair the leak properly.

Related: learn more about car repairs you should avoid DIYing here.

Turn To Mike’s Brake & Alignment Shop

If you’re noticing signs of leaking coolant, it’s best to get your car to the professionals at Mike’s Brake & Alignment Shop. Coolant leaks happen for various reasons, and we have the expertise to get your car’s engine cool again. Contact us at (817) 834-2725 or visit our website at mikesautospa.com to schedule an appointment.

Budget-Friendly Car Care Tips for New Drivers

April 2, 2024 / / 0 Comments

As a new driver, the excitement of hitting the road with your own car can sometimes overshadow the responsibility of maintaining it. However, taking care of your vehicle doesn’t have to break the bank. With some simple yet effective tips, you can keep your car running smoothly without draining your wallet. Whether you’re a student, a young professional, or simply looking to save some money, these budget-friendly car care tips will help you navigate the world of auto maintenance without burning a hole in your pocket.

Things to Keep in Mind

When it comes to saving money on car care, preventive maintenance is key. Regularly checking your car’s fluids, such as oil, coolant, and transmission fluid, can help prevent costly repairs down the road. Keeping your tires properly inflated not only improves fuel efficiency but also extends their lifespan, saving you money on replacements. Additionally, replacing your air filter and spark plugs at recommended intervals can boost your car’s performance and fuel economy without breaking your budget.

Related: “Saving Money on Gas: Fuel Efficiency Tips and Myths”

Learn Basic DIY Tasks

Another cost-effective car care tip for new drivers is to learn basic DIY maintenance tasks. Changing your car’s oil, replacing wiper blades, and checking and replacing air filters are simple tasks that you can easily learn to do at home. Investing in a basic toolkit can save you money on labor costs for minor repairs and maintenance. We also recommend purchasing a battery jump pack or jumper cables to keep in your trunk. Furthermore, regular cleaning and waxing of your car’s exterior not only enhances its appearance but also protects the paint, reducing the risk of rust and corrosion.

Related: “How to Safely Jump-start a Dead Battery”

Maintain Safe Driving Habits

In addition to these tips, new drivers should also keep in mind the importance of driving habits in prolonging the longevity of their vehicle. Avoiding aggressive driving, such as sudden stops and starts, can reduce wear and tear on your car’s engine, brakes, and tires. Adhering to the speed limit not only ensures your safety but also helps maintain optimal fuel efficiency and reduces stress on the engine. Furthermore, practicing defensive driving techniques and being mindful of road conditions can help prevent accidents and avoid costly repairs. By adopting safe and responsible driving habits, new drivers can not only protect their investment but also enjoy a smoother and more enjoyable driving experience for years to come.

Rely on the Experts!

Ready to take charge of your car’s maintenance and keep your vehicle in top condition without overspending? Visit Mike’s Brake & Alignment Shop in Fort Worth, TX, for expert advice and affordable auto care services. Our team of professionals is dedicated to helping new drivers like you navigate the world of auto maintenance with ease. Contact us at (817) 834-2725 or visit our website at mikesautospa.com to schedule an appointment.

Why You Should Always Avoid DIY Tesla Alignment

March 4, 2024 / / 0 Comments

Maintaining proper wheel alignment is vital for any vehicle, and Tesla cars are no exception. When it comes to alignments, the debate between DIY checks and professional services is a common dilemma for many Tesla owners. At Mike’s Brake & Alignment Shop, we appreciate the enthusiasm for hands-on projects, but aligning a Tesla is a complex process that requires precision and specialized equipment. In this blog, we’ll explore why opting for a professional Tesla alignment is crucial.

Precision Matters

DIYers are attracted to the idea of taking matters into their own hands. Despite the abundance of online guides promising a perfectly aligned Tesla, attempting a DIY alignment without the necessary knowledge and tools could result in misalignments. Tesla vehicles are engineered with cutting-edge technology, and inadvertently tampering with these intricate sensors and components may lead to issues such as uneven tire wear, diminished fuel efficiency, and eventually, engine performance.

Related: Learn more about the reasons behind car engine failure here.

Specialized Equipment

Tesla vehicles, particularly those equipped with Autopilot features, rely heavily on sensors and cameras to navigate and operate safely. Professional Tesla alignments involve specialized equipment that ensures these sensors are precisely calibrated. DIY attempts often lack access to this equipment, potentially leaving your Tesla’s safety features inoperable or unreliable. Trusting a professional service with all your car maintenance needs ensures that your vehicle’s intricate systems are aligned with the manufacturer’s specifications.

Related: learn more about why both routine maintenance and repairs matter here.

Safety First

Tesla’s commitment to safety is a cornerstone of its brand. Aligning the vehicle’s wheels impacts its handling, braking, and overall stability. A misaligned Tesla can compromise these safety features, putting you and your passengers at risk. Professional alignment services have the expertise to adjust your Tesla’s suspension and steering components accurately, prioritizing safety and ensuring your vehicle performs as intended.

Preserving Warranty and Resale Value

Attempting a DIY alignment on your Tesla could void your warranty if any issues arise. Tesla’s warranty typically covers defects and malfunctions that occur through normal use or factory errors. However, DIY alterations may not be covered, leaving you responsible for any resulting damage or issues. Additionally, when it comes time to sell or trade-in your Tesla, potential buyers may be wary of a vehicle with a history of DIY maintenance, impacting its resale value.

Trust Mike’s Brake & Alignment Shop for professional Tesla Alignment in Fort Worth, TX

At Mike’s Brake & Alignment Shop, we ensure precision, safety, and the preservation of your vehicle’s performance and value. We possess the knowledge and expertise to ensure your Tesla performs at its best, without compromising safety or efficiency. Contact us by calling (817) 834-2725 or visit our website at mikesautospa.com for more information.

How to Safely Jump-start a Dead Battery

February 7, 2024 / / 0 Comments

Dealing with a dead car battery can be frustrating, especially when you’re in a hurry or far from help. However, learning how to safely jumpstart a dead battery can save you time, money, and the hassle of waiting for roadside assistance. In this step-by-step guide, we will walk you through the process of jumpstarting your car’s dead battery safely and efficiently.

A Step-by-Step Guide to Jump-starting Your Dead Battery

Before you begin, make sure you have the necessary tools. You will need a set of jumper cables and a vehicle with a fully charged battery to provide the jumpstart. Once you have the tools ready, identify the batteries in both vehicles. Locate the positive (+) and negative (-) terminals on each battery. It’s important to note that not all car batteries are located in the same place, so consult your vehicle’s manual if you’re unsure.

Related: “The Warning Signs of a Bad Battery”

Step 1: Position the Vehicles

First, bring the working car close to your own. It doesn’t matter if they are parallel or facing each other, but ideally, the two engines should be within two feet of each other.

Step 2: Turn Off Both Cars

Make sure both vehicles are turned off before proceeding to the next step.

Step 3: Connect the Positive Clamps

Begin by connecting the positive red clamps of the jumper cables to the positive terminal of your dead battery. ALWAYS connect to your dead battery first before connecting to the live battery. Remember to look closely to ensure you are connecting to the correct part.

Step 4: Connect the Negative Clamps

Now, attach the negative black clamps of the jumper cables to the negative terminal of the live battery. For your dead battery, attach the negative clamp to an unpainted metal surface under your hood that is far from the battery. This will ground the circuit and prevent sparking.

Step 5: Start the Working Car

Start the working vehicle and let it run for a few minutes. This will help charge your dead battery.

Step 6: Start Your Car

Attempt to start your own vehicle while the cables are still connected. If it doesn’t start immediately, give it another minute and try again.

Step 7: Disconnect the Cables

Carefully disconnect the cables in the reverse order: the black negative cable from your battery, the black negative cable from the good battery, the red positive cable from the good battery, and then the red positive cable from your battery.

After jump-starting your car, consider taking a longer route to allow the battery sufficient time to recharge. Even if your battery jumps successfully, it’s a sign that it may need replacement soon.

Jump-Starting Alternatives

If the traditional jump-starting method doesn’t work for you, consider purchasing a battery jumper pack. This is a portable battery with cables specifically designed for jump-starting cars. It’s important to carefully follow the instructions provided with the battery pack, as different models may have specific requirements.

Related: “What to Do If Your Car Won’t Start”

Conclusion

Remember, safety is crucial when jump-starting a car. If you’re unsure or uncomfortable with the process, it’s best to seek assistance from a professional. Contact Mike’s Brake & Alignment Shop in Fort Worth, TX, by calling (817) 834-2725 or visit our website at mikesautospa.com. We are here to provide expert help for all of your automotive needs, including battery replacements and engine issues.

The Reasons Behind Car Engine Failure

January 4, 2024 / / 0 Comments

Engine failure is something that no car owner wants to have. It’s inconvenient and expensive. Studies show that more than one-third of Americans could struggle to pay for an unexpected auto repair. However, at Mike’s Brake & Alignment Shop, we want to make sure you have quality information about the reasons that lead your car engine to fail and how to avoid them. In this month’s blog, we shed light on the common causes of engine failure.

Lack of Regular Maintenance

The primary cause of engine failure is often a lack of regular maintenance. Your engine must receive enough oil between its moving parts and enough air from the air filters. Therefore, neglecting regular maintenance can be the difference between a healthy engine and a costly failure.

Related: learn more about the role of air filters in car maintenance here.

Overheating

Another common culprit of engine damage is overheating. This issue often stems from problems within the cooling system. A leak in the radiator, malfunctioning water pumps, or a damaged thermostat can prevent proper heat dissipation, leading to overheating. As a motorist, you should be attentive to your vehicle’s temperature gauge and it’s advisable to have a mechanic inspect your vehicle every now and then.

Related: learn more about what to expect in state safety inspection of your vehicle here.

Ignition System Failures

Lastly, issues with the ignition system can also lead to engine failure. Components like spark plugs, ignition coils, and distributors are critical for an engine’s operation. Faulty spark plugs can cause misfires, reduced fuel efficiency, and increased emissions. Similarly, a failing ignition coil can lead to a breakdown of the engine’s ability to properly combust fuel.

Conclusion

When you notice any of the problems above, bring your car to Mike’s Brake & Alignment Shop and our technicians will fix them in no time. Visit our website at mikesautospa.com or give us a call at (817) 834-2725 to schedule an auto service. We are equipped to handle all your engine concerns and ensure your vehicle runs smoothly and safely.

Gas Octane Ratings Explained

December 6, 2023 / / 0 Comments

When it comes to filling up our vehicles with fuel, most of us are familiar with the options available at the gas station. One of the key choices we make is selecting the right octane rating for our vehicles. Octane ratings play a crucial role in determining the performance and efficiency of our engines. However, understanding what these numbers mean and how they impact our vehicles can be a bit confusing. In this blog post, we will delve into the world of gas octane ratings and shed light on what they are and why they matter.

What are Octane Ratings?

Gasoline octane ratings refer to the measure of a fuel’s ability to resist knocking or pinging during combustion. This knocking phenomenon occurs when the air-fuel mixture in the engine ignites prematurely, leading to inefficient combustion and potential damage to the engine. Octane ratings are represented by numbers, such as 87, 89, and 93, which you commonly encounter at the gas pump. The higher the octane rating, the more resistant the fuel is to knocking.

But what determines the appropriate octane rating for your vehicle? It primarily depends on the engine’s design and compression ratio. High-performance engines with higher compression ratios typically require higher octane fuel to prevent knocking. On the other hand, most standard vehicles are designed to run efficiently on regular gasoline with octane ratings of 87.

Which Octane Rating Should I Use?

While higher octane fuel may be necessary for certain vehicles, it is important to note that using premium fuel in a vehicle designed for regular gasoline will not enhance its performance. Conversely, using regular fuel in an engine that requires higher octane may lead to knocking and decreased efficiency. It is crucial to consult your owner’s manual or check the fuel cap for the recommended octane rating. By following the manufacturer’s guidelines, you can ensure optimal engine performance, fuel efficiency, and avoid potential engine damage.

Related: “Saving Money on Gas: Fuel Efficiency Tips and Myths”

Conclusion

At Mike’s Brake & Alignment Shop in Fort Worth, Texas, we understand the importance of using the right octane rating for your vehicle and its engine. Our team of experts is here to answer any questions you may have and help you make informed decisions. Visit our website at mikesautospa.com or give us a call at (817) 834-2725 to schedule an auto service. Trust in our expertise to keep your vehicle running smoothly and efficiently.

The Warning Signs of a Bad Battery

November 1, 2023 / / 0 Comments

Car battery problems are not uncommon. Most of the time, they leave car owners helpless, because the vehicle can be immobilized due to a faulty battery. However, recognizing the warning signs of a bad battery can save you from unexpected breakdowns and inconvenience. In this blog post, we will discuss the warning signs that indicate your battery may be nearing the end of its life.

Dimming Headlights and Interior Lights

One of the first telltale signs of a bad battery is the dimming of headlights and interior lights. If you notice that your lights are not as bright as they used to be or they flicker every now and then, it could be a sign that your battery is losing its charge. These electrical issues such as a bad alternator usually occur when the battery is struggling to provide enough power to the electrical systems of your vehicle.

Related: Learn more about how to troubleshoot your car’s light issues here.

Slow Engine Crank

When you turn the key in the ignition, a healthy battery should provide enough power to start the engine quickly. However, if you notice that the engine takes longer to crank or if there is a delay before the engine starts, it may be a sign of a weak battery. This slow cranking is an indication that the battery is losing its ability to deliver sufficient power.

Related: Learn more about what to do if your car won’t start here.

Frequent Jump-Starts

If you find yourself needing to jump-start your vehicle frequently, it is a clear indication that your battery is not holding a charge as it should. While jump-starting can get you going temporarily, it is important to address the underlying battery issue to avoid being stranded in the future.

Swollen or Bulging Battery Case

A swollen battery case is a visible sign that something is wrong with your battery. High temperatures or overcharging can cause the battery case to expand or bulge. If you notice any abnormalities in the shape of your battery, it is essential to have it checked by a professional to prevent any further damage or potential hazards, such as battery leakage, corrosion, or electrical malfunction.

Conclusion

A failing battery can leave you stranded at the most inconvenient times. To ensure your safety and avoid unexpected battery failures, trust the experts at Mike’s Brake & Alignment Shop. Call us today at (817) 834-2725 or visit mikesautospa.com to schedule a battery inspection. Let us help you stay on the road with a reliable and well-maintained vehicle.

What to Do If Your Car Won’t Start

October 17, 2023 / / 0 Comments

There’s nothing more frustrating than being ready to go, only to find that your car won’t start. Whether in the parking lot after dinner, in your driveway before work, or at the rest stop after you’ve stopped for snacks, a non-starting car can throw a wrench in your plans. To help give you some insight, we’ve put together steps you can take to troubleshoot and potentially fix the issue, allowing you to get back on the road as soon as possible.

Identify the Possible Causes

Most people don’t keep a set of mechanic’s tools in their trunk. Therefore, when your car won’t start, you feel pretty helpless. But don’t give up. Try to pinpoint the possible causes before attempting any repairs. Several factors could be at play, such as a dead battery, or even a power steering problem. Take a moment to observe any dashboard warning lights or unusual noises that occurred before the car stopped running. This information will be helpful when communicating with a professional mechanic.

Perform Basic Checks

Before calling for professional assistance, there are a few basic checks you can perform. First, ensure that the car is in the park (or neutral for manual transmissions) and that the parking brake is engaged. Check the battery connections to ensure they are secure and free from corrosion. If you suspect a dead battery, try jump-starting the vehicle using a set of jumper cables and another working car’s battery.

Related: Learn more about how to jump start a car’s battery here.

Check the Key Fob

A defective key fob can cause issues with starting some modern cars that feature keyless entry and ignition systems. These systems rely on a coded signal from the smart key fob to start the engine. If your car fails to recognize the key, it will not start.

In such situations, the most straightforward solution might be to replace the battery in the key fob. You can identify this as the issue if the central locking system also fails to function.

If the basic checks don’t solve the problem, it is advisable to consult a qualified mechanic who can diagnose and address these problems effectively.

Rely on Mike’s Brake & Alignment Shop!

If you have exhausted all troubleshooting steps and your car still won’t start, it’s time to seek professional help. At Mike’s Brake & Alignment Shop, we specialize in diagnosing and repairing automotive issues. Our certified ASE technicians are equipped with the knowledge and tools necessary to get your car back on the road as quickly as possible. Contact us today at (817) 834-2725 for reliable and efficient car repair services.

Car Care for Extreme Weather

September 14, 2023 / / 0 Comments

As car owners, we often take for granted the reliable performance of our vehicles, regardless of the weather conditions. Yet, extreme weather—whether it’s scorching heat, cold, or torrential rain—can take a toll on your car if not properly cared for. In this blog post, we’ll talk about car maintenance and care required to ensure your vehicle’s longevity and performance even when Mother Nature is at its most extreme.

Surviving the Scorching Heat

When the sun beats down relentlessly, your car can feel like an oven on wheels. High temperatures can affect everything from your engine’s performance to the condition of your tires. To combat the summer heat, start by checking and topping up your vehicle’s coolant levels. Proper engine cooling is essential to prevent overheating. Additionally, consider window tinting to protect your interior from sun damage and reduce the heat inside your car. Don’t forget to inspect your tires’ pressure and tread depth, as hot pavement can accelerate tire wear.

Conquering the Freezing Cold

Winters can be equally brutal, especially on your car’s battery, fluids, and tires. Begin by testing your car’s battery to ensure it can handle the cold. Weak batteries are more likely to fail in freezing temperatures. Next, switch to cold weather oil to keep your engine lubricated in sub-zero conditions. Investing in winter tires is also a smart move for better traction on icy roads.

Related: Learn more about which is best for you – all-season tires or winter tires here.

Navigating Torrential Downpours

Heavy rain can present its own set of challenges for drivers. Adequate tire tread depth is crucial to prevent hydroplaning on wet roads, so ensure your tires are in good condition. Also, examine your wiper blades for wear and tear, as visibility is paramount during rainstorms. Maintain proper tire pressure to avoid blowouts, and make sure your brakes are in top working order to reduce stopping distances on slippery surfaces.

Related: Learn more about which brake pads are right for you here.

Conclusion

At Mike’s Brake & Alignment Shop, we are here to help you keep your vehicle in top-notch condition throughout the year. Contact us at (817) 834-2725 or visit our website at mikesautospa.com to schedule an appointment or discuss your specific maintenance or repair concerns. Whether it’s brake repairs, wheel alignments, or general maintenance, our skilled technicians have the knowledge and expertise to handle it all.

The Role of Air Filters in Car Maintenance

August 17, 2023 / / 0 Comments

When it comes to car maintenance, there are several crucial components that require regular attention to ensure optimal performance and longevity. One such component that often goes overlooked is the air filter. Despite its relatively small size, the air filter plays a vital role in the overall health and efficiency of your vehicle’s engine. In this blog post, we will explore the importance of air filters in car maintenance and why keeping them clean and functioning properly is essential.

What Do Air Filters Do?

Air filters in cars prevent dirt, dust, pollen, and other contaminants from entering the engine. They ensure that only clean air is reaching the combustion chamber, where the fuel is burned to power your vehicle. Over time, however, the air filter can become clogged with debris, affecting the engine’s performance and fuel efficiency. A dirty air filter restricts airflow, causing the engine to work harder and consume more fuel. Additionally, it can lead to decreased acceleration, rough idling, and even engine misfires. Regularly replacing or cleaning your car’s air filter is a simple but effective way to maintain engine health and prevent costly repairs.

Related: “Routine Maintenance vs Repairs: The Critical Difference and Why Both Matter!”

How to Change Your Air Filter

Changing the air filter in your car is a relatively simple task that can have a significant impact on the performance and longevity of your vehicle’s engine. To begin, locate the air filter housing, which is usually a black plastic box near the engine. Open the housing by removing the clips or screws that hold it together. Take out the old air filter and inspect it for dirt, dust, or damage. If it looks dirty or clogged, it’s time for a replacement. Align the new air filter properly in the housing, ensuring that it fits securely. Finally, reattach the housing cover, making sure all clips or screws are tightened. It’s important to consult your car’s manual for specific instructions and to ensure you purchase the correct air filter for your vehicle. Regularly changing your air filter, typically every 12,000 to 15,000 miles or as recommended by your car manufacturer, will help maintain engine performance and prolong the life of your car.

Related: “Why Do You Need To Hire a Good Mechanic for Your Car?”

Rely On The Professionals

At Mike’s Brake & Alignment, we understand the importance of proper car maintenance, including the regular inspection and replacement of air filters. As a trusted auto service provider in Fort Worth, Texas, we offer professional air filter checks and replacements to keep your vehicle running smoothly. Our experienced technicians are well-versed in the intricacies of various car models and can ensure that your air filter is clean and functioning optimally. Don’t neglect this essential aspect of car maintenance – visit our website at mikesautospa.com or call us at (817) 834-2725 to schedule an appointment today.

Older posts

Recent Posts

Search

Contact Us

© 2024 Mike’s Brake & Alignment Shop

Theme by Anders Noren — Up ↑